These are the Windows 98 boot disk images available from AllBootDisks. Download the diskette image you need, and if you need assistance creating a bootable diskette from this image, visit the how-to page. Thanks to Ed Jablonowski from Bootdisk.com for creating these disks.
Features | Documentation | Knowledge Base | Discussion Forums
Windows 98 Installation Guidelines
At this time, however, the only legal way of obtaining a Windows 98 CD is a legal purchase of the operating system. We suggest contacting Microsoft for a replacement Windows 98 Setup CD, assuming you can show proof of purchase. However, since Windows 98 is a retired operating system, you may have trouble doing that.
A Windows 98 Startup Disk is a considerable improvement on that produced by earlier versions of Windows, not least because it contains a number of generic, real-mode ATAPI CD-ROM and SCSI drivers that allow CD-ROM devices to become available when running Windows 98 from the Startup Disk.
Windows 98 Installation Guidelines
You can install Windows 98 in a virtual machine using the standard Windows 98 CD.
Note: Some Microsoft Windows 98 OEM disks included with new computers are customized for those computers and include device drivers and other utilities specific to the hardware system. Even if you can install this Windows 98 operating system on your actual computer, you may not be able to install it in a VMware Workstation virtual machine. You may need to purchase a new copy of Windows to install in a virtual machine.
Before installing the operating system, be sure that you have already created a new virtual machine and configured it using the VMware Workstation New Virtual Machine Wizard (on Windows hosts) or Configuration Wizard (on Linux hosts).
Installation Steps Installation Steps
Use the VMware Workstation Configuration Editor to verify the virtual machine's devices are set up as you expect before starting the installation. For example, if you would like the Windows 98 setup program to install a sound driver, be sure that sound is enabled in the virtual machine's configuration. VMware also recommends that you disable the screen saver on the host system before starting the installation process.
Insert the Windows 98 CD in the CD-ROM drive.
Power on the virtual machine to start installing Windows 98.
Choose to boot from CD-ROM, then select the Start Windows 98 Setup from CD-ROM option. The setup program runs FDISK and reboots.
Once again, choose to boot from CD-ROM, then select the Start Windows 98 Setup from CD-ROM option. The setup program continues installing Windows 98.
Follow the Windows 98 installation steps as you would for a physical PC.
VMware Tools VMware Tools
Be sure to install VMware Tools in your guest operating system. For details, see Installing VMware Tools.
Enabling Sound After Installing Windows 98 Enabling Sound After Installing Windows 98
If sound was disabled at the time you installed Windows 98, you can enable it after the operating system has been installed. To set up the virtual machine to play sound, see Configuring Sound in VMware Workstation.
Enabling Networking After Installing Windows 98 Enabling Networking After Installing Windows 98
If networking was disabled at the time you installed Windows 98, you can enable it after the operating system has been installed. To set up networking for a virtual machine, follow the instructions below.
Windows Host Windows Host
Shut down Windows 98 and power off the virtual machine.
From the VMware Workstation window, on the Settings menu, choose Configuration Editor and click Add.
Follow the instructions in the Add Hardware Wizard to add a virtual Ethernet adapter.
Power on the virtual machine.
When Windows 98 reboots, it auto-detects an AMD PCNET Family Ethernet Adapter (PCI-ISA) and prompts for the Windows 98 CD-ROM to install drivers. The default Ethernet adapter settings should work fine and do not need to be changed.
Use the Network icon in the Control Panel to view or change network settings. For example, you may want to add the TCP/IP protocol since Windows 98 does not install it by default.
Linux Host Linux Host
Shut down Windows 98 and power off the virtual machine.
From the main program window, on the Settings menu, choose Configuration Editor and open the Ethernet Adapters panel.
Select a network connection type for the virtual machine and click the Install button.
Click OK to save the updated configuration, then power on the virtual machine.
When Windows 98 reboots, it auto-detects an AMD PCNET Family Ethernet Adapter (PCI-ISA) and prompts for the Windows 98 CD-ROM to install drivers. The default Ethernet adapter settings should work fine and do not need to be changed.
Use the Network icon in the Control Panel to view or change network settings. For example, you may want to add the TCP/IP protocol since Windows 98 does not install it by default.
Known Issues Known Issues
After Windows 98 has been installed, you may notice COM5 and COM6 devices exist within the Windows Device Manager. These devices do not actually exist and are not consuming IRQ or other resources. You may remove them using the Windows device manager if you like.
On a Linux host with an XFree86 3.x X server, it is best not to run a screen saver in the guest operating system. Guest screen savers that demand a lot of processing power can cause the X server on the host to freeze.
Support for EMM386.EXE and other memory managers is currently limited. If you initially boot using a customized non-standard MS-DOS or Windows 98 boot floppy, be sure that EMM386.EXE (or other memory manager) is not being loaded. HIMEM.SYS and RAMDRIVE.SYS can be loaded and used without problems.
Microsoft’s Windows 95 was a huge leap from Windows 3.1. It was the first release of Windows with the Start menu, taskbar, and typical Windows desktop interface we still use today. Windows 95 won’t work on modern PC hardware, but you can still install it in a virtual machine and relive those glory days.
RELATED:How to Install Windows 3.1 in DOSBox, Set Up Drivers, and Play 16-bit Games
This may be useful if you want to play an old game that doesn’t work in Windows 10’s compatibility mode, although Windows 98 may be more ideal for Windows 9x-era games. Or you could just do it for a little kick of nostalgia. We wouldn’t blame you.
What You’ll Need
You’ll need two things for this: A Windows 95 ISO file and a Windows 95 boot disk image. Unlike modern operating systems, the Windows 95 installation disc isn’t bootable. You must first boot into an MS-DOS environment from a Windows 95 boot disk, which would have been a floppy disk at the time, to get the installation started.
If you have an old Windows 95 CD lying around, you can insert it into your PC and create an ISO file from it. While ISO files of Windows 95 are available online, bear in mind that Windows 95 is still under Microsoft copyright, and can’t be legally downloaded from the web. So start digging through those old drawers of yours.
Once you’ve got your Windows 95 ISO file, you can download a boot diskette image from AllBootDisks. You will probably just need to download the “Windows95a.img” file. Windows 95b (also known as Windows 95 OSR2) was only available to OEMs (Original Equipment Manufacturers), so any Windows 95 disc you have lying around will either by the original Windows 95 release (also known as Windows 95 RTM) or the Windows 95a release (also known as Windows 95 OSR1), which came with Service Pack 1 installed.
Step One: Create Your Virtual Machine
RELATED:Beginner Geek: How to Create and Use Virtual Machines
We’ll be doing this in VirtualBox, which is completely free to use and available on Windows, macOS, and Linux. You can do it in other virtual machine programs like VMware, but the process of configuring the virtual machine software will be a little different.
Once you have VirtualBox installed, click the “New” button to create a new virtual machine.
Enter whatever name you like and select “Windows 95” from the Version box. If you name it “Windows 95”, VirtualBox will automatically choose the correct Windows version.
Choose how much RAM you want to expose to your virtual machine. VirtualBox recommends 64 MB, while official Microsoft blog The Old New Thing claims that Windows 95 won’t boot if it has more than around 480 MB of memory. You could split the difference and safely use 256 MB, which would be more than enough for old Windows 95 applications.
Continue through the wizard until you’re prompted to create your virtual hard disk. VirtualBox will automatically suggest 2.0 GB, and you probably don’t want to go over that. The retail versions of Windows 95 only support the FAT16 file system, which means they can’t use drives over 2 GB in size.
Windows 95b (aka OSR2), which was only released to device manufactures and never sold at retail, does support FAT32. So, if you were using this version of Windows 95, you could theoretically use up to 32 GB of space.
Don’t boot up the machine right after you’re finished creating it. First, you’ll need to change a few settings. Right-click your Windows 95 virtual machine and select “Settings”.
Sep 10, 2017 Watch Outlander Season 3 Episode 1: The Battle Joined online. SideReel features links to all your favorite TV shows. Outlander Season 3 (FULL Watch Online)-+ Dailymotion. For You Explore. Do you want to remove all your recent searches? All recent searches will be deleted. Outlander Season 3 Episode 1 Full Streaming. Outlander Season 3 (FULL Watch Online).ONLINE-STREAM. Outlander Season 3 Episode 12. Watch Outlander Season 3 Episode 1 online via TV Fanatic with over 6 options to watch the Outlander S3E1 full episode. Affiliates with free and paid streaming include Amazon, iTunes, Vudu, STARZ. Oct 03, 2017 Where To Watch Outlander On STARZ. You can watch both old and new episodes of Outlander through STARZ.If you watch through your TV, you can watch Outlander Season 3 with the STARZ TV subscription at 8 7c every Sunday. If you just want to watch Outlander Season 3 online, you can also use STARZ direct subscription. Can I Watch Outlander For Free On STARZ? Outlander season 3 episode 1 free online. Aug 23, 2017 69 'Watch Outlander Season 3 Episode 1' iphone, watch Outlander on slice, watch Outlander online for free, 49 'Watch Outlander Season 3 Episode 1' on ipad, watch Outlander full episodes, watch Outlander online for free full episodes, watch Outlander full episodes season 3, watch Outlander episodes online.
Click the “System” category, click the “Acceleration” tab, and uncheck “Enable VT-x/AMD-V” hardware virtualization.
Click Backup and Restore (Windows 7)Screenshot by Matt Elliott/CNET4. Click System and Security3. You have options for where you want to save the backup image: external hard drive or DVDs. Open the Control Panel (easiest way is to search for it or ask Cortana).2. Restore from windows backup image wind…. Click Create a system image in the left panel5.
If you leave this option enabled, you’ll be able to install Windows 95, but it will just show a black screen when it boots up afterwards.
Next, click the “Storage” category and select the virtual drive under the Floppy controller. Click the floppy disk button to the right of Floppy Drive and click “Choose Virtual Floppy Disk File” in the menu. Browse to the boot disk .img file and select it.
Finally, click the Empty disc drive under the IDE controller, click the disc icon to the right of Optical Drive, and click “Choose Virtual Optical DIsk File”. Browse to your Windows 95 ISO file and select it.
Click “OK” to save your settings when you’re done.
Step Two: Prepare Your Virtual C: Drive
You can now just double-click the Windows 95 virtual machine in your library to boot it up. It will boot to a DOS prompt.
Note that the virtual machine will capture your keyboard and mouse once you click inside it, but you can press the host key—that’s the right Ctrl key on your keyboard, by default—to free your input and use your PC’s desktop normally. The key is displayed at the bottom right corner of the virtual machine window.
First, you’ll need to partition the virtual drive you created. Type the following command at the prompt and press Enter:
This process is very simple. You’ll be starting with an empty drive, so you just want to create a DOS partition. That’s the default option, which is “1”. You just need to accept the default options to go through the fdisk process.
You can just press “Enter” three times after launching fdisk to create a DOS partition, create a primary partition, and agree that you want to use the maximum size of the drive and make the partition active.
You’ll be told you have to restart your virtual machine before continuing. To do this, click Input > Keyboard > Insert Ctrl-Alt-Del in VirtualBox. Press the right Ctrl key to free your mouse first, if necessary.
You’ll now need to format your new partition, which will be available in the virtual machine as the C: drive. To format it, type the following command at the A:> prompt and press Enter:
Type Y and press Enter to agree to the format process when prompted. You’ll then be prompted to Enter a label for the drive. You can enter whatever you like, or nothing at all. Press “Enter” afterwards to finish the process.
Buy Windows 98 Installer
Step Three: Launch the Windows 95 Installer
You will now need to copy the files from the Windows 95 ISO file to your C: drive. Theoretically, you should just be able to run the Setup program from the disc drive itself to install Windows 95. However, this produces errors, as the disc drive isn’t mounted after the installer reboots, and the installer isn’t able to find driver files it needs. Instead, we found it much easier to simply copy the files to the C: drive and run the installer from there.
First, figure out which drive letter your disc drive was mounted as. This is displayed when your virtual machine boots up. On our virtual machine, it’s the R: drive. If you forgot and can’t see it on your screen, you can always restart your virtual machine once again with the Ctrl+Alt+Delete option in the keyboard menu to view this info.
Run the following command to copy the files from the Windows 95 disc to your C: drive, replacing R: with whatever drive letter corresponds to your virtual disc drive.
When the process is complete, you can now switch to your C: drive and launch the setup program from the INSTALL program, like so:
Press Enter once again to continue when prompted.
The graphical Windows 95 setup program will appear. From here on out, you can do everything graphically without messing with the DOS prompt.
Windows 98 Install Disk
The actual installation process is simple. On most screens, you can accept the default options and speed through the process. You will be prompted to enter your Windows 95 product key before the installation process finishes, however. Different editions of Windows 95 require different product keys, so ensure you’re using the correct key.
When you reach the Analyzing Your Computer screen, be sure to check the “Network Adapter” and “Sound, MIDI, or Video Capture Card” options to ensure all the virtual machine’s hardware is correctly detected and configured.
When you’re asked to create a Startup Disk, you can select “No, I do not want a startup disk” to continue. This isn’t 1995 and you’re not installing this on a real PC, after all.
The actual installation process will be extremely quick on modern hardware, even in a virtual machine.
At the end of the setup process, Windows will prompt you to reboot and tell you to remove the floppy disk from your computer. To do this, click Devices > Floppy Drive > Remove Disk From Virtual Drive. Click “OK” to reboot your PC and continue afterwards.
The setup process will continue setting up your hardware. You’ll be told you have to provide a workgroup name to continue, but you can enter anything you like here.
Finally, you’ll be prompted to provide your time zone and set up a printer. You can just click “Cancel” in the Add Printer Wizard window to skip configuring a printer when it appears.
Finally, your PC will reboot and you’ll be prompted to create a password. You’ll then be presented with the Windows 95 desktop. You’re done—you now have a Windows 95 virtual machine.
Windows 98se Install Disk
To really get back into the 90’s, open Windows Explorer from Windows 95’s Start menu and head to the C:InstallFunstuffVideos folder. You’ll find music videos for Weezer’s Buddy Holly (“Weezer”) and Edie Brickell’s Good Times (“Goodtime”), which were included on the Windows 95 disc. There’s also a movie trailer for the movie Rob Roy, which was also released in 1995.
The videos in the “Highperf” folder are higher quality than the ones in the main Videos folder, so be sure to watch those—your modern PC can handle them!
Install Windows 98 Sata Hard Disk
READ NEXT
Windows 98 Setup Disc
› Wi-Fi vs. ZigBee and Z-Wave: Which Is Better?
› What Does “FWIW” Mean, and How Do You Use It?
› How to Automatically Delete Your YouTube History
› What Is “Mixed Content,” and Why Is Chrome Blocking It?